Connecting to MPLAB Starter Kit on Board...

Currently loaded firmware on Starter Kit on Board
Firmware Suite Version.....01.27.15 *
Firmware type..............PIC32MX

Now Downloading new Firmware for target device: PIC32MX250F128B 
Downloading bootloader
Bootloader download complete
Programming download...
Downloading RS...
RS download complete
Programming download...
Downloading AP...
AP download complete
Programming download...

Currently loaded firmware on Starter Kit on Board
Firmware Suite Version.....01.39.15
Firmware type..............PIC32MX

Target detected
Device ID Revision = A1

The following memory area(s) will be programmed:
program memory: start address = 0x0, end address = 0x1f7ff
boot config memory



Programming...
Programming/Verify complete